Features:
Does this machine mainly USES high-speed milling cutter will more shall ways of PCB board according to the edit path integral equipment in advance.Replaced the artificial fold break, C - CUT or PUSH cutting defects, improve product quality, reduce scrap rate, the machine adopts the man-machine interface the Windows xp operating system, simple and humanized interface design, automatic cutting path correction system, high pixel CCD program production and blocks and single step edit and modify the program, two platform interactive work of PCB loading device, can effectively reduce the machine open time, so as to achieve the ideal production efficiency.
Does configuration high-resolution CCD zoom lens, auxiliary program teaching and editing function, higher and more accurate precision, image with clear.
Does MARK point positioning correction system, automatically move path are displayed when treasure and die setting path tracking, shows at a glance, automatic correction of opposites function, higher precision, lower PCB to put slant range within 3 mm, machine vision can be automatically route correction, eased the operator when put a plate of pure degree requirements, greatly improve the working efficiency.
Does the program about the workbench copy, block copy, copy, display, multi-angle connection plate single-step tracking changes, block editing functions, it simplifies the program production time, improve the efficiency of editing.
Does power import fan to make cleaner and 10 v high voltage electrostatic eliminator, dust collection effect is more ideal, ultrasound is smaller.
Does the knives' service life monitoring, milling cutter for cutting the thing distance automatically after rising and falling to another section of blade cutting position, distance and frequency can be set according to the blade length from top to bottom, and extend the life of the cutter.
Does the transparent door design, make the process be clear at a glance, door stop slowing down 50% run two ways for different customers to choose, stop is pre processing at the time of the accident prevention, and to provide a security check operating environment.Reduction of 50% is for the sake of convenient when doing the application programmer for machining process monitoring.
Does use two platforms even and smooth exchange processing PCB substrate, reduce the waiting time, increase production.
Does provide import and domestic main shaft at the same time, to meet different customer needs.